|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC241LP3 / 241LP3E v01.0905 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Typical Applications The HMC241LP3 / HMC241LP3E is ideal for: * Base Stations & Repeaters * WLAN, WiMAX & WiBro * CATV / DBS Features High Isolation: 43 dB @ 2 GHz Low Insertion Loss: 0.7 dB @ 2 GHz Single Positive Supply: Vdd = +5V Integrated 2:4 TTL Decoder 3x3 mm SMT Package 8 SWITCHES - SMT * Test Equipment Functional Diagram General Description The HMC241LP3 & HMC241LP3E are general purpose non-reflective SP4T switches in low cost leadless surface mount packages. Covering DC - 4.0 GHz, this switch offers high isolation and has a low insertion loss of 0.7 dB at 2 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 2:4 decoder is integrated on the switch requiring only 2 control lines and a positive bias to select each path, replacing 4 to 8 control lines normally required by GaAs SP4T switches. Electrical Specifications, TA = +25 C, For TTL Control and Vdd = +5V in a 50 Ohm System Parameter Frequency DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 4.0 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 4.0 GHz "On State" RF1-4 "Off State" DC - 2.5 GHz DC - 4.0 GHz 0.3 - 4.0 GHz 0.3 - 4.0 GHz 0.3 - 4.0 GHz 0.3 - 4.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 40 100 ns ns 40 38 35 25 Min. Typ. 0.6 0.7 0.9 1.2 45 43 40 30 18 12 12 26 45 Max. 0.9 1.0 1.2 1.5 Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm Insertion Loss Isolation Return Loss Return Loss Input Power for 1dB Compression Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) Switching Characteristics 8 - 102 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC241LP3 / 241LP3E v01.0905 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Insertion Loss 0 Isolation 0 -10 RF1 RF2 RF3 RF4 INSERTION LOSS (dB) -1 ISOLATION (dB) -20 -30 -40 -50 -60 -5 0 1 2 3 4 5 6 FREQUENCY (GHz) -70 0 1 2 3 -2 +25 C +85 C -40 C -3 8 4 5 6 FREQUENCY (GHz) -4 Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 0 1 2 3 4 5 6 FREQUENCY (GHz) RFC RF1-4 ON RF1-4 OFF Bias Voltage & Current Vdd Range = +5.0 Vdc 10% Vdd (Vdc) +5.0 Idd (Typ.) (mA) 2.7 Idd (Max.) (mA) 5.0 Truth Table Control Input A LOW HIGH LOW HIGH B LOW LOW HIGH HIGH Signal Path State RFC to: RF1 RF2 RF3 RF4 TTL/CMOS Control Voltages State Low High Bias Condition 0 to +0.8 Vdc @ 5uA Typ. +2.0 to +5.0 Vdc @ 70 uA Typ. NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 103 SWITCHES - SMT HMC241LP3 / 241LP3E v01.0905 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Absolute Maximum Ratings Bias Voltage Range (Vdd) Control Voltage Range (A & B) Channel Temperature Thermal Resistance (Insertion Loss Path) +7.0 Vdc -0.5V to Vdd +1 Vdc 150 C 200 C/W 240 C/W -65 to +150 C -40 to +85 C +20 dBm (0.05 - 0.5 GHz) +27 dBm (0.5 - 4.0 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 8 SWITCHES - SMT Thermal Resistance (Terminated Path) Storage Temperature Operating Temperature Maximum Input Power Vdd = +5 Vdc 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL N/C LEADS, GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC241LP3 HMC241LP3E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Leadframe Plating Sn/Pb Solder 100% Matte Tin MSL Rating MSL1 MSL1 [1] Package Marking [3] 241 XXXX 241 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 8 - 104 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC241LP3 / 241LP3E v01.0905 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Pin Descriptions Pin Number 1, 4, 9, 12, 15 2, 3, 10, 11, 13 Function RF4, RF3, RF2, RF1, RFC Description This Pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required. This pin should be connected to PCB RF ground to maximize isolation. Package bottom has exposed metal paddle that must also be connected to PCB RF ground. Interface Schematic N/C 5, 14, 16 GND 8 SWITCHES - SMT 8 - 105 6 Vdd Supply Voltage +5V 10% 7 B See truth table and control voltage table. 8 A See truth table and control voltage table. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC241LP3 / 241LP3E v01.0905 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Evaluation PCB 8 SWITCHES - SMT List of Materials for Evaluation PCB 108333 [1] Item J1 - J7 J8 - J11 C1 - C7 C8 U1 PCB [2] Description PCB Mount SMA RF Connector DC Pin 100 pF Capacitor, 0402 Pkg. 10k pF Capacitor, 0603 Pkg. HMC241LP3 / HMC241LP3E SP4T Switch 104708 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. 8 - 106 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC241LP3 / 241LP3E v01.0905 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 4.0 GHz Notes: 8 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 107 |
Price & Availability of HMC241LP3 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |